product description features parameters specification unit operating wavelength range 1260~1360 1510~1610 nm through insertion loss (@ op , t op , all sop, exclude connector) 2% 5% 10% 0.4 0.6 0.9 db polarization dependent loss 0.05 db return loss (exclude connector) 45 db tapped monitoring responsivity (relative to nominal power at input port) 2% 5% 10% 10~23 26~59 52~110 14~25 35~65 70~120 ma/w responsivity temperature dependence (@1310nm or 1550nm) 0.3 db responsivity polarization dependence 0.1 db pd pd dark current (@ 70c, -5v bias) 0.5g bandwidth 10 na 2.0g bandwidth 2.5 na reverse voltage 20 v forward current 10 ma conditions input optical power 2% 5% 10% 21 16 12 dbm operating temperature range (<85%rh, non-condensing) -5 to +70 c storage temperature range (<85%rh, non-condensing) -40 to +85 c fiber type smf-28 applications performance specification ns s0019 - r06. 20110316 single channel integrated tap monitors itms series oplinks single channel integrated tap monitor (itms) is a hybrid component that integrates a fat spectral response of a thin-flm tap with a high sensitivity pin photodiode for power monitoring applications. the itms minimizes component assembly costs and module foot - print while increasing module design efciency by facilitating fber management. the itms integrates the functionality of an optical coupler and a photodiode while deliv - ering low insertion loss and low dark current with high temperature stability over a wide wavelength range. it is compact and easy to mount on a pcb board for module and net - work system use. applications include dwdm channel power monitoring, optical network switching/protection monitoring, re-confgurable optical add/drop multiplexers, and gain/ attenuation monitoring in amplifer systems. oplink can provide customized designs to meet specialized feature applications. also, oplink ofers modular assemblies that integrate other components to form a full function module or subsystem. ? 2-/3-pin p ackage easily mounted on a pcb ? f lat and broad operating wavelength range ? l ow insertion loss and pdl ? l ow dark current ? v arious tap ratios available ? h igh temperature stability with hermetically sealed photodiode ? dw dm channel monitoring ? optical net work switch/protection monitoring ? r e-confgurable optical add/drop multiplexers ? g ain/attenuation monitoring in amplifer systems ? edf as and raman amplifers
46335 landing pkwy fremont, ca 94538 tel: (510) 933-7200 fax: (510) 933-7300 email: sales@oplink.com ? www.oplink.com product lines: ? mux/demux ? switching/routing ? coupling/splitting ? monitoring/conditioning ? amplifcation ? transmission ? interconnect ? rgb laser modules itms ordering information mechanical drawing / package dimensions (dimension in mm) oplink can provide a remarkable range of customized optical solutions. for detail, please contact oplinks oem design team or account manager for your requirements and ordering information (510) 933-7200. standard package (p1, bare fiber or loose tube) miniature package (p4, bare fiber only) miniature package (p5, loose tube only) input(black ) input(blue) output(white ) 2.5 m m 0.45 mm lead, 12mm st andard package pin assignment pin 1: anod e pin 2: cathode pin 3: case g roun d 00 tap ratio 2/98 = 02 5/95 = 05 10/90 = 10 wavelength bandwidth package & fiber type fiber length 0.5g= 05 2.0g= 20 p1+250m bare fber =11 p1+900m loose tube =12 p4+250m bare fber = 41 p5+900m loose tube = 52 0.5meter= h 1.0meter= 1 1.5meter= 5 2.0meter= 2 connector type none = 1 fc/pc=2 fc/spc=3 fc/apc=4 sc/pc=5 sc/spc=6 sc/apc=7 st=8 lc=9 mu=a single channel integrated tap monitors itms series s0019 - r06. 20110316 1310/1550nm= d 1310nm= 3 c+l band= e rohs: 1. add g to the end of the above pn for rohs 6 requirement.
|
